Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals

Abstract

Inclusions contributing to acicular ferrite nucleation were investigated from a crystallographic point of view in low carbon low alloy steelweld metals. The samples from electro slag welding (ESW) and submerged arc welding (SAW) deposits with various cooling rates were prepared in this study. In those samples, intragranular acicular ferrite formation was observed from inclusions. The inclusions contributing to acicular ferrite formation were of multi-phase type consisting of amorphous phase, spinel type and MnS. They were surrounded by a Ti-enriched layer. It was confirmed by selected area diffraction patterns and energy-dispersive X-ray spectrometer analyses that the Ti-enriched layer was TiO. The acicular ferrite had a Baker–Nutting orientation relationship with the TiO layer on the inclusion surface. The misfit was 3.0% at the interface between the acicular ferrite and TiO. Therefore, it is considered that TiO on the inclusion surface contributes to the heterogeneous nucleation of acicular ferrite by small lattice misfit. However, themorphologies of ferrite growth which nucleated from inclusions were different in both samples. Whereas the growth of ferrites nucleated from TiO was enough in ESW, the size of nucleated ferrite in SAW was a few hundred millimetres in size. In the early stage of nucleation from TiO, ferrite had small deviation from Kurdjumov–Sachs orientation relationship (K–S relationship) in both ESW and SAW. However, there was a difference in the growth stage of ferrite. The ferrite orientations were gradually changed to fit to the K–S relationship in ESW. On the other hand, the nucleated ferrite in SAW stopped growing and the newly nucleated ferrite which had K–S relationship prior to austenite was formed adjacently because of large super cooling due to small heat input.