Crystallization, morphology, structure and miscibility of poly(ethylene oxide) based blends

Abstract

AbstractResults of an investigation on the morphology, structure, isothermal crystallization, thermal behaviour and miscibility of poly(ethylene oxide) (PEO) based binary blends are reported. In particular poly(vinyl acetate)(PVAc), poly(methyl methacrylate) (PMMA) at different tacticity and poly(ethyl methacrylate) (PEMA) were added to PEO.It was found that with the only exception of isotactic poly(methyl methacrylate) (IPMMA), the addition of the above cited components causes a depression in both the spherulite growth rate and the overall kinetic rate constant. The experimental G and Kn were analyzed by means of the latest kinetic theory in order to determine the influence of composition on the process of surface secondary nucleation. The optical microscopy of thin films of the sample revealed that the blends crystallized with volume filling crystals at least up to 50/50 blend composition. The small angle X‐ray scattering curves were analyzed using a recently developed methodology. The structural properties of the blends were attributed to the presence of the non crystallizable material in the interlamellar or interfibrillar regions of PEO. From the glass transition temperature it has been deduced that an homogeneous amorphous phase is present for all the blends except for the PEO/IPMMA amorphous system. For the system PEO/atactic poly(methyl methacrylate) (APMMA) the miscibility was also predicted by theoretical approaches.