Abstract
The rationale of this study has been to use fluidized beds to crystallize amorphous spray-dried skim milk powders with multiple stages of processing at different temperatures and humidities with the aim of rapidly making mostly crystalline powders. This paper discusses the performance of a multiple-stage fluidized bed dryer, and a combination of crystallization of lactose in spray drying at high humidity (lactose nuclei formation) and subsequent fluidized bed drying. Two different combinations of spray dryer and multi-stage fluidized-bed dryer have been suggested to crystallize lactose in skim milk powder. The results show significant improvements in the crystallinity of the powders. Moisture sorption test and X-ray diffraction analysis were used to assess the crystallinity of the powders. The processed powders that were crystallized in a humid-loop spray drying combined with a two-stage fluidized-bed dryer/crystallizer showed 92% improvement in lower amorphicity by processing at different stages of 70°C, 50% RH and 80°C, 50% RH for 15 minutes. The conventionally spray-dried powders that were crystallized in a three-stage fluidized-bed dryer/crystallizer showed 87% improvement in lower amorphicity (less moisture sorption) by processing at different stages of 60°C, 50% RH; 70°C, 40% RH; and 80°C, 40% RH for 20 minutes. The multiple-stage fluidized bed system showed distinctive potential to crystallize lactose significantly in skim milk powder using an industrial-feasible process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have