Abstract

A unique impact fracture behavior is found in a high-Mn austenitic steel (24Mn–4Cr-0.4C-0.3Cu) in this work. The steel exhibits concurrent twinning-induced plasticity (TWIP) effect and the transformation-induced plasticity (TRIP) effect. By analyzing the load-deflection curves recorded during Charpy impact testing, the resistance to crack initiation and propagation is quantified from the absorbed energy. The high-Mn steel demonstrates good resistance to crack initiation at 273 K and 77 K. However, as the temperature decreases from 273 K to 77 K, there is an accelerated transition from stable crack growth to unstable crack growth during impact, resulting in the deterioration of resistance to crack propagation. The plastic deformation of the impact-tested samples, especially in the region close to the crack-path profile was quantitatively analyzed using neutron Bragg-edge transmission (BET) imaging. The deformation zones, divided by using the width of the 200 Bragg edge, exhibit good agreement with the impact absorbed energy characteristics obtained from dynamic load-deflection curves. Moreover, the unstable growth transition point was roughly determined on the impact-tested sample. Then, the electron backscatter diffraction (EBSD) technique is employed to examine the deformation microstructure along the crack-path in the impact-tested samples. The results revealed the dual roles of TRIP effect in impact toughness of the high-Mn steel. On one hand, the TRIP effect plays a positive role in improving resistance to crack initiation and propagation. On the other hand, the excessive accumulation of brittle ε/α՛-martensite caused by the enhanced TRIP effect at 77 K leads to quasi-cleavage fracture, thereby playing a negative role. Finally, we discussed the prominent toughening mechanisms associated with the TWIP and TRIP effects, which greatly impact the impact fracture behavior.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call