Crustal electrical structure and seismicity of the Weiyuan shale gas block in Sichuan Basin, southwest China

Abstract

Abstract Hydraulic fracturing, a significant contributor to seismic activity within and around operational fields, has been extensively used in shale gas production. Magnetotelluric (MT) sounding is an effective geophysical tool for identifying high-conductivity fluid-filled and/or molten regions. In this study, we deploy a dense grid of rectangular MT sites to investigate the 3D geoelectrical resistivity structure beneath the Weiyuan shale gas block (WSGB) and subsequently examine the causes of seismic activity. The resistivity data, obtained through 3D inversion accounting for topography using ModEM, reveals a shallow low-resistivity layer (<10 Ω-m) within the WSGB, ranging from ∼2 to 5 km in depth. This layer exhibits multiple isolated areas with very low resistivity (<5 Ω-m), indicative of fluid-filled zones associated with hydraulic fracturing or shale gas-bearing formations. In the northwestern WSGB, the Weiyuan anticline presents a high-resistivity dome extending possibly to depths beyond 20 km, without extending beyond the northern boundary of our study area. Conversely, the sedimentary zone in the southeastern WSGB displays a low-resistivity feature, with an extremely low-resistivity center (<1 Ω-m). Since a consistent high-resistivity zone exists beneath each fault and its top depth is <5 km, so faults might not extend downward below 5 km. Earthquakes with magnitudes (ML) of 3.0 or higher predominantly occur close to the faults, when considering industrial production data, we found a noteworthy correlation between earthquakes with ML < 3.0 and annual shale gas production within the WSGB. Tectonic faulting is not the leading cause for ML < 3.0 earthquakes but likely the primary contributor to seismic events with ML ≥ 3.0.