Abstract
In this research, “green” composites were fabricated by blending waxy maize starch (WMS) with micro/nanofibrillated cellulose (MFC). Further, an environmentally friendly, sustainable, and water-soluble cross-linker, 1,2,3,4-butane tetracarboxylic acid (BTCA), was used to cross-link WMS to fabricate cross-linked starch-based composites. The method described here provides a benign and convenient way to produce cross-linked starch-based composite films (≈ 300 μm in thickness), comparable to commercially available plastic sheets. The process can be easily scaled up for commercial production. Industrially pregelatinized WMS was used to obtain smooth, transparent, and defect-free films. Cross-linking helped in reducing the moisture absorption as well as made the films and composites insoluble in water. MFC (15% MFC)-cross-linked WMS composite films exhibited excellent tensile properties with a Young’s modulus of over 2.3 GPa, fracture strain of 3.1%, and fracture stress of 39 MPa, as a result of MFC incorporati...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.