Abstract
To contribute to exact predictions of the ignition of flammable mixture by a hot surface and ensure safety against fire, this study aims to clarify the critical ignition condition of a propane/air premixture impinging on a hot surface with external heating. The ignition threshold of heat flux depends on the flow velocity, but that of temperature hardly depends on flow velocity and equivalence ratio. The ignition occurred at the position where the residence time of species was the longest. It corresponds to the position of the lowest heat transfer coefficient. The temperature boundary layer thickness played a significant role in the ignition process as only the heat flux from the top, bottom, and back surfaces of the heater contributed to ignition in the presence of forced convection. The prediction model of the ignition threshold of heat flux and temperature was derived through dimensional analysis. This model effectively explains the ignition characteristics, regardless of the differences in thermal convection mode, dimensions, and geometric arrangements of a heater, as confirmed by comparison with reference data. Additionally, the ignition threshold of temperature can be predicted if the external heating power is known, and it is useful to assess the fire risk.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.