Abstract
Critical heat flux (CHF) at a low-flow condition in a small-hydraulic-diameter duct is an important phenomenon for a Materials Test Reactor/Advanced Test Reactor (MTR/ATR) design under a number of accident conditions, including reflood transients. Current CHF models in the literature, such as the Mishima/Nishihara and Oh/Englert CHF models, are based on macroscopic system parameters and not local thermal-hydraulic conditions. These macroscopic parameter–based models cannot be readily used for analysis in transient best-estimate thermal-hydraulic codes. The present work focuses on developing a low-flow-rate CHF correlation, based on local conditions, that is amenable to implementation into a best-estimate transient thermal-hydraulic code for a small-hydraulic-diameter duct. The model development proceeds with a means of correlating CHF data to local conditions parameters and then applying a correction factor to the resulting correlation, subsequently permitting accurate predictions over a range of pressures. An evaluation of the proposed local conditions-based CHF model is conducted by predicting independent sets of CHF experimental results over a range of flow rate, pressure, and subcooling conditions. Conclusions on the viability of the proposed CHF model and suggestions for future efforts in improving the reflood heat transfer CHF models for small-hydraulic-diameter ducts are provided with an evaluation of the model results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.