Critical Flow Section in Collector Channel

Abstract

This paper shows how the critical flow section in a collector channel can be located by solving the dynamic equation of spatially varied flow, Manning's equation, and making use of the singular-point concept. In addition to channel length and tailwater elevation, the occurrence of a critical flow section in a spatially varied flow also depends on the combination of channel cross-sectional geometry, roughness, slope, and inflow rate. When the critical flow section is necessary to be developed in a collector channel, the two dimensionless parameters (Fq/S0 representing the design capacity and N/S0 representing the channel roughness) derived in this study guide selection of channel cross-sectional parameters. A set of design charts is provided for trapezoidal channels with a side slope of 1V:1H, 0.5V:1H, or 0V:1H.