Abstract
In this study, several tests for supplementary cementitious materials (SCMs) were evaluated to find the best methods to rapidly screen out inert materials, measure overall reactivity, and differentiate between pozzolanicity and latent hydraulicity. The R3 matrix and lime reactivity tests were found to be the most effective at quickly screening out inert materials. However, slow-reacting materials may appear to have low reactivity in both tests and extending the test duration better depicts material reactivity. Additionally, SCMs with higher alumina content perform better in the R3 tests due to the higher heat release and more bound water associated with the formation of calcium aluminate hydrates compared to calcium silicate hydrates, creating reactivity bias when compared to SCMs with lower alumina content. Measuring the calcium hydroxide content of R3 pastes, through thermogravimetric analysis or single point mass loss, can also differentiate between pozzolanic and hydraulic materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
