Abstract
The creep, thermal expansion, and elastic modulus properties for chemically vapour deposited SiC fibres were measured between 1000 and 1500°C. Creep strain was observed to increase logarithmically with time, monotonically with temperature, and linearly with tensile stress up to 800 MPa. The controlling activation energy was 480 ± 20 kJ mol−1. Thermal pretreatments near 1200 and 145O° C were found to significantly reduce fibre creep. These results coupled with creep recovery observations indicate that below 1400°C fibre creep is anelastic with negligible plastic component. This allowed a simple predictive method to be developed for describing fibre total deformation as a function of time, temperature, and stress. Mechanistic analysis of the property data suggests that fibre creep is the result of β-SiC grain boundary sliding, controlled by a small percentage of free silicon in the grain boundaries.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
