Abstract
To address the challenging issues of large deformation, control difficulties, and susceptibility to failure in the support structure of soft coal roadways, this study utilizes the CVISC block creep model in UDEC software. The model incorporates Coulomb slip without cohesive contact to simulate the characteristics of soft coal, such as its loose, fragile, and small-block nature. Additionally, a soft coal nonlinear discrete element creep model is developed to investigate the creep characteristics of soft coal under triaxial compression, with the aim of revealing the underlying creep destabilization mechanism in soft coal tunnels. Based on the research findings, a primary, strong active support technology is proposed. This approach involves the use of high-preload, high-strength anchor rods and anchor cables, as well as the implementation of steel mesh and plastic woven mesh to enhance surface protection. The study highlights that: (1) The shear cracks inside the coal body of the soft coal specimen transform into tensile cracks under external force, leading to an increase in the number of tensile cracks. This is an important symbol of accelerated creep in soft coal. Improvement in peripheral pressure helps inhibit the generation of tensile cracks inside the specimen. (2) The rapid development of creep and inter-particle tensile fissures within the coal body particles themselves, along with the change in stress state after the excavation of the roadway, are the main reasons for the overall creep damage of the roadway. (3) The support force in the early stage of shed cable support is small, which cannot inhibit the accelerated development of tensile fissures. This leads to continuous deformation of the roadway, resulting in the failure of the support structure in the later stage and aggravated roadway damage. (4) The new support technology helps control surface deformation by enhancing the strength of the roadway protection surface. This suppresses the development speed and number of tensile fissures during roadway deformation, improves the starting strength of the roadway for accelerated creep, and enables effective control of the overall deformation of the soft coal roadway. Thus, the effectiveness of roadway support is remarkable.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.