Creep behavior of wood flour composites made from linseed oil‐based polyester thermosets

Abstract

AbstractThe creep behavior of new polymers prepared by free radical polymerization of styrene‐crosslinked resins obtained from linseed oil and derived wood flour (WF) composites have been analyzed. Results of short‐time flexural creep tests at different temperatures are reported. The effects of the wood flour content and temperature are discussed. The creep deformation is significantly reduced with the incorporation of wood flour, due to the excellent fiber/matrix interaction. The creep strain was modeled using the creep power law and the Bürgers models. The parameters were determined from the best fitting of the experimental data using a nonlinear optimization method. Although both models gave a good description of the viscoelastic creep of the materials, the Bürgers model was preferred because of its ability to predict recovery. A master curve was built using the time temperature superposition principle, and the time shifts were well fitted using Arrhenius model. There was a good superposition of the short‐term master curve and long‐term data for samples tested at the same time after preparation. A reduction of the creep deformation was observed when the responses of samples tested after 2 and 5 years from preparation were compared, which was attributed to aging derived from the oxidative crosslinking of linseed oil fragments in the network. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011