Abstract
Shaping of dense ceramics is difficult due to their inherent brittleness. Nanograined ceramics like tetragonal zirconia (TZP) can be superplastically deformed and shaped at high temperatures owing to grain boundary sliding (GBS). Herein, the enhanced plasticity of gadolinium‐doped ceria (GDC) ceramics under mild and strong AC electric current in terms of steady state creep rate under both compressive and tensile loading is demonstrated. A current density of 25 and 200 mA mm−2 is used for the creep deformation. The creep rate increases by up to two orders of magnitude under electric current. The stress exponent remains unchanged for creep experiments at 1200 °C with and without electric current, suggesting a GBS mechanism of plastic deformation in both cases. The field‐enhanced creep rate is attributed to the interaction of space–charge layer and the electric field resulting in enhanced GBS. A higher current density results in enhanced ductility of GDC even when the Joule heating effect is compensated by reducing the furnace temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.