Creep and stress relaxation modeling of vinyl ester nanocomposites reinforced by nanoclay and graphite platelets

Abstract

AbstractThis article discusses the viscoelastic behavior of a vinyl ester (Derakane 411‐350) reinforced with 1.25 and 2.5 wt % nanoclay and exfoliated graphite nanoplatelets during short‐term creep and relaxation tests with a dynamic mechanical analyzer. Linear viscoelastic models are generally composed of one or more elements such as dashpots and springs that represent the viscous and elastic properties. Stress relaxation data from the dynamic mechanical analyzer have been used to obtain the elastic parameters based on model constitutive equations. The standard linear solid model, which is a physical model, has been used for predicting the creep deformation behavior of the vinyl ester nanocomposites over a wide temperature range. Some correlations have been made with the mechanical model, such as the effect of temperature on the deformation behavior, which is well explained by the dashpot mechanism. At lower temperatures, higher creep compliance has been observed for the vinyl ester versus the nanocomposites, whereas at temperatures near the glass‐transition temperature of the vinyl ester, creep compliance in the nanocomposites is closer in magnitude to that for the vinyl ester. The creep response of the pure vinyl ester and its nanocomposites appears to be modeled reasonably well at temperatures lower than their glass‐transition temperatures. A comparison of the predictions and experimental data from the creep tests has demonstrated that this model can represent the long‐term deformation behavior of these nanoreinforced materials reasonably well. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010