Abstract

Motor vehicle crashes represent a significant cause of mortality and morbidity for young children. Safely restraining a child is typically more complicated for special cases such as children treated with a hip spica cast. In the current study, hip spica casts typical for treatment of a femoral fracture were applied to a crash dummy representing the size and weight of a 1-year-old child. This spica casted dummy was used to study the performance of 4 rear-facing car seats in a series of simulated frontal impacts. The restrained, rear-facing dummy was subjected to a frontal crash test at 30 mph (48 kph) per federal guidelines. Two of the tested car seats were specifically designed for transporting children with hip spica casts, while the other 2 were conventional seats capable of accommodating the cast. All seats were installed per the manufacturer's instructions. As a control, tests were performed without a cast using the conventional/standard seats. The lowest overall loading of the dummy's head, neck, and chest occurred during tests with the standard seats. While it was easier to seat the casted child in the spica-specific seats, these designs led to greater loading on the dummy's body. In a spica-specific seat, the chest acceleration values exceeded the federal limit in a test where the seat was installed in a reclined orientation that was within the manufacturer's described positioning. Spica-specific seats more easily accommodate the cast, but conventional seats can provide similar levels of protection in a crash. As cast and seat designs continue to evolve, hospitals might consider having a range of seats available for patient use. It is important to help caregivers make informed decisions on how and when to transport children with hip spica casts.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call