Abstract
The crack resistance of concrete structures with low reinforcement ratios requires a broader examination. It is particularly important in the case of foundations working in changing subsoil conditions. Unfavorable phenomena occurring in the subsoil (e.g., ground subsidence, landslips, non-uniform settlement) can lead to unexpected cracking. Therefore, it is necessary to check the effectiveness of the low reinforcement provided. As there are limited studies on lightly reinforced concrete structures, we performed our own experimental investigation and numerical calculations. In the beams analyzed, the reinforcement ratio varied from 0.05% to 0.20%. It was found that crack resistance in concrete members depends on the reinforcement ratio and steel bar distribution. A comprehensive method was proposed for estimating the crack resistance of lightly reinforced concrete members in which both the reinforcement ratio and the reinforcement dispersion ratio were taken into account. Furthermore, the method considered the size effect and the fracture properties of concrete. The proposed method provides the basis for extrapolation of the test results obtained for small elements and conclusions for members with large cross-sections, such as foundations, which frequently use lightly reinforced concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.