Crack propagation modes in fiber and particulate composites in the microstructure

Abstract

AbstractThe influence of the hard or soft inclusions and the mesophase layers in either a soft‐hard‐soft or hard‐soft‐hard combination of biphase plates submitted to dynamic tensile loads on the fracture mode and bifurcation process in both phases was investigated in this paper. It was assumed that the soft or hard matrix is infolding the hard or soft inclusion of the plate, so that the plate constitutes a meridional section of the representative volume element of a unidirectional fiber composite, or a principal section of a particulate. The influence of the mechanical properties of either phase on the crack propagation velocity and the initiation of crack bifurcation was studied by using high‐speed photography and dynamic caustics. The results showed that the propagating crack tended to bifurcate either in the brittle or in the mesophase layer under certain conditions of propagation velocity. It was shown that bifurcation of a propagating crack depends on the elastic moduli and Poisson's ratios of the phases, as well as on the extent of the mesophase layer, which depended on the adhesion quality of phases.