Abstract
Stable crack growth under mode I and mixed-mode loading of two fine grained advanced graphites, SNG742 and T220, has been studied within small (18 mm diameter) specimens of the diametral compression disc geometry to investigate the criterion for crack propagation. Cracks were propagated from a central notch, inclined at 0° or 30° to the loading axis, as the tests were observed in situ by X-ray computed microtomography. The three-dimensional (3D) displacement fields were measured by digital volume correlation. The crack shape, tip location and crack opening displacements were determined by 3D phase congruency edge detection of full field displacements. Linear elastic 3D finite element simulations calculated the J-integral and mode I, mode II and mode III stress intensity factors (SIFs) acting on the crack tip, using the full field displacements as boundary conditions. For SNG742 and T220 specimens with notch angle of 0°, nearly pure mode I crack propagation was obtained. For specimens loaded with the 30° notch angle, the SIFs changed from mixed mode I/II towards pure mode I as the crack propagated. The mode II SIF was less than 20% of the mode I SIF, and as the crack extended over a distance ∼3 mm, the critical mode I SIF (fracture toughness) was insensitive to the mode II SIF, with SNG742 graphite having higher fracture toughness than T220 graphite.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
