Crack propagation behavior of ultra-high-performance concrete (UHPC) reinforced with hybrid steel fibers under flexural loading

Abstract

This study investigates the crack propagation behavior of UHPC blended with straight steel fibers of different lengths (6, 13, and 20 mm), at varying replacement ratios (0.5%, 1.0%, and 1.5%) and a constant total fiber volume fraction (Vf = 2.0%), under flexural loading. The results indicate that blending with 0.5% medium length fibers and 1.5% long fibers yields the best flexural behavior compared to other investigated specimens. Using digital image correlation (DIC) technique, the evolution of surface deformation and strain field was analyzed. Based on the recorded images and corresponding analyses, the full debonding strain between the fibers and the matrix was determined to be about 0.32%. Moreover, the maximum strain for generating cracks was approximately 3.25%, irrespective of the fiber length. When longer fibers were replaced with shorter fibers at 0.5% or 1.0% replacement ratios, Crack opening displacement (COD) variations along the beam presented a linear shape. However, at higher replacement ratios (1.5% and 2.0%), the profile showed an abrupt change, and COD variations were non-constant. The samples comprising hybrid fibers presented a faster decline in the crack initiation strain rate at higher replacement ratios of the longer fibers. In the initial stage of cracking, the crack propagated rapidly; however, the crack propagation speed dropped dramatically during crack evolution before it stabilizes.