Abstract

We present a tunable, high-energy optical parametric chirped pulse amplification system with a front-end based on a femtosecond Cr:ZnS laser. By taking advantage of the broad emission spectrum of the femtosecond Cr:ZnS master oscillator, we are able to directly seed the holmium-based pump around 2 µm. At the same time, the signal pulses for the parametric process are generated via Raman self-frequency shifting of the red end of the spectrum centered at 2.4 µm. The solitons, generated in a fluoride fiber, are tunable over the wavelength range between 2.8 and 3.2 µm. The optical parametric amplifier operates at a 1 kHz repetition rate, and consists of two stages equipped with ZGP as nonlinear crystal. The generated idler pulses are tunable between 5.4 and 6.8 µm with a pulse energy of up to 400 µJ. Dispersion management using bulk material stretching and compression in combination with precise phase shaping prior to amplification enables idler pulses of a sub-100 fs duration, translating into a peak power as high as 4 GW.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call