Abstract
The electrochemical reduction of Cr(VI)–Cr(III) in wastewater by iron and copper–iron bimetallic plates was evaluated and optimized. Iron has been used as a reducing agent, but in this work a copper–iron galvanic system in the form of bimetallic plates is applied to reducing hexavalent chromium. The optimal pH (2) and ratio of copper to iron surface areas (3.5:1) were determined in batch studies, achieving a 100% reduction in about 25 min. The Cr(VI) reduction kinetics for the bimetallic system fit a first order mechanism with a correlation of 0.9935. Thermodynamic analysis shows that the Cr(VI) reduction is possible at any pH value. However, at pH values above 3.0 for iron and 5.5 for chromium insoluble species appear, indicating that the reaction will be hindered. Continuous column studies indicate that the bimetallic copper–iron galvanic system has a reduction capacity of 9.5890 mg Cr(VI) cm −2 iron, whereas iron alone only has a capacity of 0.1269 mg Cr(VI) cm −2. The bimetallic copper–iron galvanic system is much more effective in reducing hexavalent chromium than iron alone. The exhausted plates were analyzed by SEM, EDS, and XRD to determine the mechanism and the surface effects, especially surface fouling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have