Abstract
Currently, data recording density in cover-layer-protected near-field-recording (NFR) and multiple-recording layered NFR optical data storage technology is limited by the difficulty in obtaining high-refractive-index cover layer materials. In addition, with the exception of improved resolution, the higher the numerical aperture (NA), the poorer the optical characteristics. However, in this study, we present novel cover-layer-protected solid immersion lens (SIL)-based NFR optics that provide superior optical performance with higher recording density, greatly enhanced focal depth, and less sensitivity to near-field air-gap-distance variation by modulating the amplitude and phase in the entrance pupil using annular pupil zones. Using an annular aperture consisting of three concentric annular zones to effect amplitude and phase modulation, the 1.45 NA cover-layer-protected SIL-based NFR optics achieved a data recording density as high as that of conventional 1.80 NA SIL-based NFR optics. These 1.45 NA optics yielded a full-width at half-maximum (FWHM) spot size of 0.315 lambda, a focal depth of 0.82 lambda, a focused beam spot sensitivity to air-gap-distance within the near-field region of 0.04 lambda, and a sidelobe intensity lower than 7%. In comparison with conventional 1.80 NA SIL-based NFR optics, the annular aperture optics achieved 3.5 times longer focal depth and much lower focused beam spot sensitivity to air-gap distance while maintaining the same high resolution. The introduction of this novel specially designed NFR optics could greatly improve data capacity in multiple-recording layered NFR.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.