Abstract

The coverage properties of silicon nitride (Si 3N 4) films prepared by the catalytic chemical vapor deposition (Cat-CVD) technique were systematically studied. By increasing the catalyzer–substrate distance, the coverage was improved from 46 to 67% on a 1.0-μm line and space pattern. The etching rate of Cat-CVD Si 3N 4 film measured using 16BHF solution was independent of the deposited position of the micro-patterns deposited, and was approximately 3 nm/min, one order of magnitude lower than that of plasma-enhanced CVD (PE-CVD) Si 3N 4 film. This means that Cat-CVD Si 3N 4 films are denser than PE-CVD Si 3N 4 films, and that the quality at the side wall is equivalent to that on the top surface. That is, Cat-CVD Si 3N 4 films show a passivation effect, which was excellent, even at the side wall of micro-patterns. These results suggest that Si 3N 4 films prepared by Cat-CVD are suitable for the passivation films in microelectronic devices having a step configuration, such as TFT-LCDs and ULSIs.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.