Coupling soil washing with chelator and cathodic reduction treatment for a multi-metal contaminated soil: Effect of pH controlling

Abstract

Contamination of soil with heavy metals has become a significant environmental issue worldwide. In previous studies, a technology that couped EDTA-washing and cathodic reduction technology was developed to further remove heavy metals from soil contaminated with electroplating waste compared with single soil washing technology. Although the method showed a synergistic effect in previous studies, the effect of soil suspension alkalization and the mechanism behind it remain unclear. High soil pH will have an impact on target metal removal, energy consumption and further utilization of soil. In this experimental research, we investigated the efficacy of pH control on coupling soil washing and cathodic reduction to remove multiple heavy metals from soil under various current densities. To alleviate the OH− ions generated by the cathode and improve the reduction efficiency of metals, an automatic pH controller was used, resulting in a significant increase in the removal rate of target metals. The experimental results show that controlling the pH of soil suspension can increase the total removal rate of target metals by 3-6 times. Additionally, the removal efficiency of residual Pb in the soil is increased by about 30%. In terms of ecological risk, pH control could reduce the solubility and mobility of metals by 50%, and the ecological risk was greatly reduced, especially for Zn, from about 90 mg/kg to 50 mg/kg. Further research is needed to explore the mechanism of the synergistic effect and improve the efficiency of this technology for the subsequent development of coupling EDTA-washing and cathodic reduction.