Abstract
AbstractIn this study, a series of time-averaged tomographic particle image velocimetry (TPIV) measurements are completed for simple angle, cylindrical film cooling holes on a flat plate with an inclination angle of 30 deg and a diameter of 4 mm. The flat plate is installed in a low-speed wind tunnel with a mainstream turbulence intensity of Tu=8% and an average velocity of 21.6 m/s. The blowing ratios of the jet range from M = 0.3 to M = 1.5, and the density ratio of the jet is fixed at DR = 1. The Reynolds number of the cooling jet varies from 1700 to 8400. The repeatability and accuracy of the tomographic particle imaging velocimetry (TPIV) measurements are compared against the results obtained by other flowfield measurement techniques. The results of the TPIV measurements are presented in velocity and vorticity iso-surface distributions in 3D, as well as 2D planar slices of velocity, vorticity, turbulence intensity, and Reynolds Stress distributions within the measurement volume. The characteristics of the flowfield are coupled with the detailed film cooling effectiveness distribution obtained using the pressure-sensitive paint (PSP) technique. An inverse relation among volumetric turbulence accumulation (TA) and surface film effectiveness, η, can be correlated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Thermal Science and Engineering Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
