Coupling of multilayer CAD-CAM prosthetic components: Computing the user interaction influence on the adhesion interface geometry

Abstract

The fracture resistance of multilayer zirconia crowns has recently been proven to be improved by using lithium millable disilicate glass–ceramic blocks (D’Addazio in Materials, 2020). Accordingly, the framework and the ceramic coating are designed and milled using a CAD-CAM technology and the two separated prosthetic components are then manually assembled by the dental technician and glued with the fusion of a glass–ceramic material. It is essential, during the CAD phase, to design a gap between the framework and the decorative veneer that will later be filled by the fused ceramic.Since the act of gluing the two parts is manually performed by the dental technician, we aim at investigating the operator influence on the final gap with respect to the designed gap. For this purpose, an original geometrical investigation method was developed to enable the 3D digital analysis of the whole fusion interface. During the CAD design stage, two technicians input a different setting for the gap between the two components. The framework and veneering structure were designed, the milled components were produced, and the zirconia framework was sintered, then the two CAD-on prosthetic components were scanned before and after their fusion/crystallization to analyze the physical internal gap. The results show that manual assembly cancels out any effect of the precision settings adopted during CAD-CAM design of the components, as well as any benefit expected from machining on a CNC milling machine, thus requiring, as a last step, manually retouching the prosthesis to correctly fit in the mouth.