Abstract
The pollutants emitted by traveling vehicles are prone to accumulation inside urban highway tunnels, which poses a serious threat to the driving safety and health of passengers. This study employed the dynamic mesh method to simulate a traveling vehicle and investigated the coupling effect of vehicle wake and jet flow on the dispersion characteristics of pollutants in urban highway tunnels. To ensure the accuracy of the numerical simulation results, the turbulence model (realizable k–ε model) and dynamic mesh model were validated through field tests. The results revealed that jet flow can disrupt the large-scale longitudinal vortices pattern in the wake region, whereas vehicle wake can simultaneously weaken the entrainment strength of jet flow. The jet flow was found to be decisive in the space with a height greater than 4 m, whereas the vehicle wake intensity was considerably stronger at the bottom space of the tunnel, leading to the accumulation of pollutants in the passenger breathing zone. To evaluate the effect of jet fans on pollutants in the breathing zone, an innovative dilution efficiency was proposed. The dilution efficiency can be significantly affected by the intensity of vehicle wake and turbulence. Moreover, the dilution efficiency of alternative jet fans was better than that of traditional jet fans.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.