Abstract

When employing hydraulic processes to increase gas drainage efficiency in underground coal mines, coal seams become a three-phase medium, containing water intruding into the coal pores with the inherent occurrence of gas. This can change the stress state of the coal and cause instability. This work studied the mechanical properties of coal containing water and gas and derived an appropriate failure criterion. Based on mixture theory of unsaturated porous media, the effective stress of coal, considering the interaction of water and gas, was analyzed, and the failure criterion established by combining this with the Mohr–Coulomb criterion. By introducing the stress factor of matrix suction and using fitted curves of experimentally determined matrix suction and moisture content, the relationships between coal strength, gas pressure, and moisture content were determined. To verify the established strength theory, a series of triaxial compression strength tests of coal containing water and gas were carried out on samples taken from the Songzao, Pingdingshan, and Tashan mines in China. The experimental results correlated well with the theoretical predictions. The results showed a linear decrease in the peak strength of coal with increasing gas pressure and an exponential reduction in peak strength with increasing moisture content. The strength theory of coal containing water and gas can become an important part of multiphase medium damage theory.

Highlights

  • Occurrence of a methane disaster is an important factor restricting efficient and safe production in coal mines

  • The filter paper moisture contents and the corresponding suction values of NaCl solution are drawn into the logarithmic coordinates for linear fitting

  • The effective stress state of coal containing water and gas was analyzed based on Mixture theory was used to describe the three-phase field equations of coal containing water and gas, and provides a method for the study of strength characteristics of three-phase unsaturated porous media

Read more

Summary

Introduction

Occurrence of a methane disaster is an important factor restricting efficient and safe production in coal mines. Hydraulic measures utilize high pressure water for power injecting into the coal seam, invading the original pores and fractures, and expanding the gas flow channels in order to achieve the goals of reservoir pressure relief and increasing permeability. These include hydraulic punching, hydraulic slotting, and hydraulic fracturing technologies in underground coal mines [5]. During these hydraulic processes, a lot of water enters the coal pores, forming a three-phase medium composed of intruding water, inherent gas, and coal. The water extension radius of previous hydraulic measures can reach 30–60 m [6], so that

Methods
Results
Discussion
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.