Coupling a CFD code with neutron kinetics and pin thermal models for nuclear reactor safety analyses

Abstract

Most system codes are based on the one-dimensional lumped-parameter method, which is unsuitable to simulate multi-dimensional thermal-hydraulics problems. CFD method is a good tool to simulate multi-dimensional thermal-hydraulics phenomena in the nuclear reactor, which can increase the accuracy of analysis results. However, since there is no neutron kinetics model and pin thermal model in current CFD codes, the application of the CFD method in the area of nuclear reactor safety analyses is still limited. Coupling a CFD code with the neutron kinetics model (PKM) and the pin thermal model (PTM) is a good way to use CFD code to simulate multi-dimensional thermal-hydraulics problems of nuclear reactors. The motivation for this work is to develop a CFD/neutron kinetics coupled code named FLUENT/PK for nuclear reactor safety analyses by coupling the commercial CFD code named FLUENT with the point kinetics model (PKM) and the pin thermal model (PTM). The mathematical models and the coupling method are described and the unprotected transient overpower (UTOP) accident of a liquid metal cooled fast reactor (LMFR) is chosen as an application case. As a general validation, the calculated results are used to compare with that of another multi-physics coupled code named SIMMER-III and good agreements are achieved for various characteristic parameters.