Coupled two-dimensional model for heavily sediment-laden floods and channel deformation in a braided reach of the Lower Yellow River

Abstract

It is difficult to predict the detailed morphodynamic processes induced by heavily sediment-laden floods in alluvial rives, due to the complexity in topography and the significant channel evolution rates, especially in a braided reach of the Lower Yellow River (LYR). A two-dimensional morphodynamic model using a coupled solution approach was firstly developed, with the effects of sediment concentration and bed deformation being directly considered in the hydrodynamic governing equations. The finite volume method with the HLL-MUSCL scheme was adopted in the numerical solution, which can obtain second-order accuracy in space and time. In addition, unstructured meshes were used to accommodate the irregular boundaries. The proposed model was validated using measurements in the braided reach of the LYR during the flood events of 2020 and 2004, with general agreement obtained between the calculated and measured hydrographs of flow and sediment concentration. The highest accuracy was achieved in the simulation of discharge, with a Nash-Sutcliffe efficiency coefficient (NSE) of 0.92. The simulation accuracy in sediment concentration was improved by the coupled approach, with the relative error of the calculated peak value decreasing from 17 % to 9 %. In addition, transport characteristics of graded suspended sediments were well simulated, with the fine fraction being transported downstream and the medium fraction depositing in the study reach. Influences of channel adjustments on the sediment transport processes were investigated during a flood event. The results demonstrated that the incised channel in 2020 was characterized by a larger water depth and smaller velocity, as compared with the shallow channel in 2004. Consequently, the peak discharge decreased and the flood propagation time was extended under the 2020 topography, associated with the lower sediment discharge at the outlet due to the reduced sediment transport capacity.