Coupled pile-soil interaction analysis in undrained condition

Abstract

The effective stress method is developed to predict the axial capacity of piles in clay. The effective stress state changes due to the resulting pore pressure change and therefore, the strength and stiffness of the soil will change. In this work, the finite element method is utilized as a tool for the analysis of pile-soil systems in undrained condition. The computer program CRISP was developed to suit the problem requirements. CRISP uses the finite element technique and allows predictions to be made of ground deformation using critical state theories. Eight-node isoparametric element was added to the program in addition to the slip element. A pile loading problem was solved in which the pile-soil system is analyzed in undrained condition. The pile is modelled as elastic-plastic material, while the soil is assumed to follow the modified Cam clay model. During undrained loading condition, the settlement values increase by 22% when slip elements are used. The surface settlement increases by about three times when the load is doubled and the surface settlement at all points increases when using slip elements due to the mode of motion which allows smooth movement of the adjacent soil with respect to the pile. The vertical displacement increases as the distance decreases from the pile and negligible values are obtained beyond 10D (where D is the pile diameter) from the center of the pile and these values are slightly increased when slip elements are used. The vertical effective stress along a section at a distance D from the pile center is approximately the same for all load increments and lower values of effective vertical stress can be obtained when slip elements are used.