Coupled five-parameter dynamics of Mindlin and third-order shear deformable FG graphene-platelets reinforced viscoelastic plates with geometric and material imperfections

Abstract

The present work investigates the coupled five-parameter dynamics, in particular, the coupled five-parameter structural resonance frequency, of functionally graded (FG) graphene-platelets reinforced viscoelastic plates in the presence of geometric and material (porosity) imperfections, based on the Mindlin theory and the third-order shear deformation plate theory (TSDPT). Various imperfections are often found in structures as a result of the challenges in manufacturing and operations over time. Geometric imperfection is considered in the FG reinforced plate structure by modelling an initial curvature in the out-of-plane direction. Material imperfections, in the form of closed-cell voids, are formulated as uniform and non-uniform FG porosity distributions. Uniform and thickness-wise FG gradation effects of graphene-platelets are accounted for in the determination of the effective material properties using a two-dimensional Halpin-Tsai micromechanics model, in conjunction with the rule of mixtures. Viscoelasticity of the FG imperfect plate structure is modelled by employing the Kelvin-Voigt model to consider energy dissipation. Using the Mindlin plate theory and the TSDPT, five equations of motion, which are coupled through the five parameters u, v, w, ϕ1, and ϕ2, are derived using Hamilton's variational principle. An assumed mode method is then employed to obtain the real and the imaginary components of resonance frequencies. The combined influences of the different effects on the structural resonance are examined. The results obtained offer a comprehensive understanding of how the FG graphene-platelets, FG porosity, plate thickness, geometric imperfection, and the utilisation of two different shear deformation plate theories collectively influence the coupled five-parameter dynamics of the FG graphene-platelets reinforced viscoelastic plate structure with imperfections. It was found that the difference in frequency resulted from the use of the two plate theories is most dominant with the FG GX and/or FG PX graphene-platelets reinforced porous plates, and that geometric imperfection was found to alter a graphene-platelets reinforced plate's sensitivity towards material imperfection.