Coupled 3D multiphysics analysis of 325 MHz ISNS RFQ structure

Abstract

Abstract A 325 MHz, 3.0 MeV Radio Frequency Quadrupole (RFQ) is being developed for 1 GeV proton accelerator for proposed Indian Spallation Neutron Source (ISNS) facility at Raja Ramanna Centre for Advanced Technology, Indore. RFQ will be a normal conducting four vane resonating structure made of Oxygen Free Electronic (OFE) copper. During high power operation of RFQ, Radio Frequency (RF) field induced heating results in temperature rise, thermal deformations and shift in resonant frequency from designed values. Therefore thermal stability of RFQ is one of the important design issues. Various RF–thermal–structural coupled multiphysics analysis methodologies for thermal management of RFQ have been attempted in past and reported in literature. However, these efforts are primarily limited to 2D simulations for a thin slice of RFQ cross section and do not addresses for longitudinal temperature rise of cooling water, distribution of frequency tuners, vane tip modulations and vane cut back at the inlet and exit of RFQ structure. This paper proposes a finite element method (FEM) based multiphysics analysis methodology for numerical simulation of RFQ structure. The methodology consists of a complete 3D-RF-fluid–thermal–structural–RF coupled analysis for predicting temperature rise, thermal deformations and frequency shift of RFQ structure due to RF heating. All analysis (electromagnetic, fluid, thermal and structural) and their coupling are carried out using a single code namely ANSYS Mechanical. The simulated results from proposed methodology are compared with published work and a maximum error of less than 7% is obtained. The numerical comparison of described methodology with other multiphysics analysis methodologies (such as importing 2D field maps and using heat transfer coefficient from empirical relations) has been carried out. The described methodology is paving the way for the design and development of ISNS RFQ structure.