Coumarin-DPPO a new bio-based phosphorus additive for poly(lactic acid): Processing and flame retardant application

Abstract

This study addresses very important aspects of the sustainable development of new flame retardant materials: (i) the preparation of a novel flame retardant (FR) additive from bio-resource, (ii) its use as FR additive in poly(lactic acid) (PLA) based composites and, (iii) the in vitro toxicity assessment of the FR. The synthesis of this bio-based FR additive was achieved through a phospha-Michael addition of diphenylphosphine oxide (DPPO) and the naturally occurring compound coumarin, yielding 4-(diphenylphosphoryl)chroman-2-one (CU-DPPO). The flame-retarded CU-DPPO PLA composites were prepared either via conventional melt blending of commercially available PLA or through reactive extrusion (REX) of L-lactide. Characterization of the composites was performed through nuclear magnetic resonance (NMR), size exclusion chromatography (SEC) and thermogravimetric analysis (TGA). TGA analysis of the FR-PLA composites showed an increase in thermal stability, confirming the beneficial effect of the CU-DPPO additive. Direct insertion probe mass spectrometry (DIP-MS) analysis was used to gain insight on the mechanism of action of the FR additive, suggesting gas-phase activity. Rheological measurements exhibited the thermo-oxidative stabilizing effect in the modified PLA. The flame retardancy of the melt-blended PLA composites with CU-DPPO was investigated by limited oxygen index (LOI), cone calorimetry and vertical burning tests (UL 94 and BKZ-VB). Samples containing 10 wt.% of CU-DPPO showed improved fire performance with a limiting oxygen index (LOI) of 29%, passing Swiss vertical burning test (BKZ-VB) and obtaining a V-0 rating in the UL 94 test. Moreover, a preliminary toxicity assessment of the CU-DPPO, carried out using an established in vitro platform, showing no adverse effects on cell viability.