Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement

The concept of sustainable development provides for the search for environmentally friendly alternatives to traditional materials and technologies that would reduce the amount of CO2 emissions into the atmosphere, do not pollute the environment, and reduce energy costs and the cost of production processes. These technologies include the production of geopolymer concretes. The purpose of the study was a detailed in-depth analytical review of studies of the processes of structure formation and properties of geopolymer concretes in retrospect and the current state of the issue. Geopolymer concrete is a suitable, environmentally friendly and sustainable alternative to concrete based on ordinary Portland cement (OPC) with higher strength and deformation properties due to its more stable and denser aluminosilicate spatial microstructure. The properties and durability of geopolymer concretes depend on the composition of the mixture and the proportions of its components. A review of the mechanisms of structure formation, the main directions for the selection of compositions and processes of polymerization of geopolymer concretes has been made. The technologies of combined selection of the composition of geopolymer concrete, production of nanomodified geopolymer concrete, 3D printing of building structures from geopolymer concrete, and monitoring the state of structures using self-sensitive geopolymer concrete are considered. Geopolymer concrete with the optimal ratio of activator and binder has the best properties. Geopolymer concretes with partial replacement of OPC with aluminosilicate binder have a denser and more compact microstructure due to the formation of a large amount of calcium silicate hydrate, which provides improved strength, durability, less shrinkage, porosity and water absorption. An assessment of the potential reduction in greenhouse gas emissions from the production of geopolymer concrete compared to the production of OPC has been made. The potential of using geopolymer concretes in construction practice is assessed in detail.

Energy-related activities are a major contributor of greenhouse gas (GHG) emissions. A growing body of knowledge clearly depicts the links between human activities and climate change. Over the last century the burning of fossil fuels such as coal and oil and other human activities has released carbon dioxide (CO2) emissions and other heat-trapping GHG emissions into the atmosphere and thus increased the concentration of atmospheric CO2 emissions. The main human activities that emit CO2 emissions are (1) the combustion of fossil fuels to generate electricity, accounting for about 37% of total U.S. CO2 emissions and 31% of total U.S. GHG emissions in 2013, (2) the combustion of fossil fuels such as gasoline and diesel to transport people and goods, accounting for about 31% of total U.S. CO2 emissions and 26% of total U.S. GHG emissions in 2013, and (3) industrial processes such as the production and consumption of minerals and chemicals, accounting for about 15% of total U.S. CO2 emissions and 12% of total ...

Harmonizing the quantification of CCS GHG emission reductions through oil and natural gas industry project guidelines

Greenhouse gas (GHG) emissions reduction in the electricity sector: Implications of increasing renewable energy penetration in Ghana's electricity generation mix

Alternative methodologies for the reduction of greenhouse gas (GHG) emissions from crude palm oil (CPO) production by a wet extraction mill in Thailand were developed. The production of 1 t of CPO from mills with biogas capture (four mills) and without biogas capture (two mills) in 2010 produced GHG emissions of 935 kg carbon dioxide equivalent (CO2eq), on average. Wastewater treatment plants with and without biogas capture produced GHG emissions of 64 and 47% of total GHG emission, respectively. The rest of the emissions mostly originated from the acquisition of fresh fruit bunches. The establishment of a biogas recovery system must be the first step in the reduction of GHG emissions. It could reduce GHG emissions by 373 kgCO2eq/t of CPO. The main source of GHG emission of 163 kgCO2eq/t of CPO from the mills with biogas capture was the open pond used for cooling of wastewater before it enters the biogas recovery system. The reduction of GHG emissions could be accomplished by (i) using a wastewater-dispersed unit for cooling, (ii) using a covered pond, (iii) enhancing the performance of the biogas recovery system, and (iv) changing the stabilization pond to an aerated lagoon. By using options i-iv, reductions of GHG emissions of 216, 208, 92.2, and 87.6 kgCO2eq/t of CPO, respectively, can be achieved.

Greenhouse gas contribution and emission reduction potential prediction of China's aluminum industry

For all its cachet, you might think that hybrid drivetrain technology is inherently green. But only 13 of 34 hybrid vehicles assessed achieve better than a 25% reduction in greenhouse gas (GHG) emissions, and just 3 exceed a 40% reduction, according to an evaluation by the Union of Concerned Scientists (UCS).1 Moreover, reductions in GHG emissions do not necessarily correlate with reductions in other toxic emissions. Like any engine output–improving technology, hybrid technology can boost both fuel efficiency and power—but the more you boost one, the less you can boost the other. That dichotomy spurred the UCS to develop its “hybrid scorecard,” which rates each hybrid according to how well it lives up to its promise of reducing air pollution.2 All the vehicles were from model year 2011 except for one, the 2012 Infiniti M Hybrid. First the UCS scored each hybrid on how much it reduced its GHG emissions relative to its conventional counterpart, on a scale of zero (least reduction) to 10 (greatest reduction). These scores reflect the percentage in fuel efficiency gain. For example, the Toyota Prius gets 50 mpg3 compared with 28 mpg for the comparable Toyota Matrix. This represents a 44.0% reduction in GHG emissions, earning the Prius a GHG score of 9.4. At the bottom of the scale, the 21-mpg hybrid VW Touareg reduces GHG emissions only 10% over the 19-mpg conventional Toureg, for a score of 0.0. With a 46% improvement, the luxury Lincoln MKZ Hybrid had the greatest reduction over its conventional counterpart. The UCS also scored hybrids for absolute emissions (rather than relative to the conventional model) of air pollutants including particulate matter, carbon monoxide, hydrocarbons, and nitrogen oxides. These scores, on a scale of zero (dirtiest) to 10 (cleanest), are based on California certifications for tailpipe emissions. As the scorecard showed, a vehicle that emits less heat-trapping gases may not necessarily emit less of other air pollutants. For example, the Mercedes Benz S400 Hybrid scored 9 on air pollution reduction, alongside the Prius and the Lincoln MKZ, but only 1.3 on GHG emissions. HYBRID SCORECARD: Top 10 Nonluxury Hybrids by Total Environmental Improvement Score “Hybrid technology doesn’t add additional challenges [to reducing exhaust pollutants] that can’t be addressed through design of the vehicle’s emission controls,” says Don Anair, senior vehicles analyst at the UCS. “Numerous manufacturers of hybrids are meeting the lowest emissions levels. Hybrid manufacturers who aren’t delivering the lowest smog-forming emissions have chosen not to do so.” Each vehicle’s air pollution and GHG scores were averaged into a total “environmental improvement score,” again with the MKZ and the Prius leading the pack, and the Touareg scraping bottom. The UCS also scored “hybrid value” (the cost of reducing GHG emissions in dollars per percent reduction) and “forced features” (options you must buy with the hybrid whether you want them or not). HYBRID SCORECARD: Top 10 Luxury Hybrids by Total Environmental Improvement Score Luke Tonachel, vehicles analyst with the Natural Resources Defense Council, compliments the scorecard for illustrating that hybrid technology is not automatically green. He says, “We should improve the efficiency of all vehicles, and [hybrid technology] is just one technology that can get us there if applied with that goal in mind.” Nonetheless, Jamie Kitman, the New York bureau chief for Automobile Magazine, questions the wisdom of emphasizing percentage improvement in gas mileage rather than absolute miles per gallon. At 21 mpg, the hybrid Cadillac Escalade 4WD represents a 29% improvement over the 15-mpg conventional model, saving nearly 2 gallons per 100 miles. But the hybrid Escalade is still a gas guzzler, and Kitman says he wishes people would see through the marketing that encourages them to buy SUVs and “crossovers” rather than ordinary cars, which are more efficient than either. Says Anair, “The scorecard shows that automakers can pair hybrid technology with advanced emission controls to help tackle climate change while reducing the health impacts from breathing polluted air.” However, he adds, alluding to the stark variation in how much hybrid technology boosted fuel efficiency, “Not all automakers are delivering on the full promise of this technology.”

High-resolution assessment of environmental benefits of dockless bike-sharing systems based on transaction data

Major US electric utility climate pledges have the potential to collectively reduce power sector emissions by one-third

As part of the Net Zero Carbon Water Cycle Program (NZCWCP) for Victoria state in Australia, we have sought to understand the potential to reduce household energy consumption and related Greenhouse Gas (GHG) emissions by influencing water use. Digital metering data disaggregated into 57 million discrete water usage events across 105 households at a resolution of 10 millilitres at 10 second intervals from June 2017 to March 2020, from a previous Yarra Valley Water (Melbourne, Australia) study, was analysed, together with the dynamic relationship between the multiple energy sources (natural gas, grid electricity, solar) used to heat water for showers in each hour of the day. Water-related energy (WRE) use, including water desalination and treatment, pumping, heating, wastewater collection and treatment, comprised 12.6% of Australia’s primary energy use in 2019. Water heating (by natural gas and electricity) comprised the largest component of WRE use for across residential, commercial, and industrial sectors. Furthermore, 69% of Victoria’s total water usage was by residential customers in 2020-2021. WRE GHG emissions were around 3.8% of Victoria’s total GHG emissions in 2018. Showers (~50% of residential WRE), system losses (~27% of residential WRE), and clothes washers (~9% of residential WRE) are the three largest components of WRE consumption. The main objective of this work is the creation of industry-accessible tools to improve knowledge and management options from the understanding of reductions in cost and GHG emissions from household showering WRE use. Potential options considered, to reduce water and energy use, as well as associated GHG emissions and customer utility bills, include (a) behaviour management such as water and energy pricing to change time of use behaviours, and (b) the adoption of efficient shower head improvements. Shower WRE and GHG emissions were found able to be strongly impacted by small changes in daily routines. GHG emissions reduction from showering could be reduced up to 20 (in summer) - 22% (in winter) by shifting demand time of showering or replacing residential showerheads. Extrapolated to state and Australian scales, reductions in water usage could be up to 14 GL (Victoria) and 144 GL (Australia), and reductions in GHG emissions 1,600 ktCO2eq (Victoria) and 17,300 ktCO2eq (Australia). It provides fundamental new information which could inform a suite of new management options to impact water-related energy from showers, and related GHG emissions and customer water and energy cost.

Mitigating the greenhouse gas emissions embodied in food through realistic consumer choices

In persuasion of global commitment of the country on reduction of Greenhouse Gas (GHG) emission, India’s ‘National Mission on Sustainable Habitat’ has included promotion of energy efficiency in residential and commercial sector and has envisaged that energy use in buildings varies significantly across income groups, building construction typology, climate and several other factors. Though substantial energy savings can be achieved in the housing sector through implementation of various carbon mitigation options, it was stated that the incremental cost of implementing energy efficient measures is estimated to vary between 3 and 5% for residential houses. The challenge before the engineers, architects and other professionals associated with building construction sector is to find out appropriate technologies that will ensure reduction of GHG emission without increasing cost of construction. As majority of construction in government sector will come from construction of small residential house belonging to Economically Weaker Sections (EWS) as part of government’s commitment to provide housing for all by 2020, assessment of GHG reduction potential of various cost-effective construction technologies is very essential to provide guidance to the stakeholders. This paper has surveyed various prevalent construction technologies in different parts of the country, analyzed the cost and embodied GHG emission for construction of the building envelope by collecting data through extensive search of literature and information obtained from construction sites. It has been found that there is ample scope of adoption of location-specific, cost-effective and eco-friendly construction technologies for construction of houses for EWS which are capable of reduction of GHG emission without any increase in cost of construction. The technologies can meet the commitment of the country at international level on reduction of GHG emission without any extra burden to state exchequer.

Greenhouse gas emission reduction and environmental quality improvement from implementation of aerobic waste treatment systems in swine farms

High-strength Portland cement concrete has a high risk of spalling in fire. Geopolymer, an environmentally friendly alternative to Portland cement, is purported to possess superior fire-resistant properties. However, the spalling behaviour of geopolymer concrete in fire is unreported. In this paper, geopolymer and Portland cement concretes of strengths from 40 to 100 MPa were exposed to rapid temperature rises, simulating fire exposures. Two simulated fire tests, namely rapid surface temperature rise exposure test and standard curve fire test, were conducted. In both types of test, no spalling was found in geopolymer concretes, whereas the companion Portland cement concrete exhibited spalling. This can be attributed to different pore structures of the two concretes. The sorptivity test found that geopolymer concrete had a significantly higher sorption, therefore more connected pores, than Portland cement concrete when compared at the same strength level. Hence, it is suggested that the water vapour can escape from the geopolymer matrix quicker than in Portland cement concrete, resulting in lower internal pore pressure. The paper concludes that, when compared at the same strength level, the geopolymer concrete possesses higher spalling resistance in a fire than Portland cement concrete due to its increased porosity.

Transitioning to Environmentally Sustainable, Climate-Smart Radiation Oncology Care