Abstract
In this paper, a thermal hydraulic analysis method based on open source CFD platform OpenFOAM was proposed. The models of coolant flow and heat transfer, fuel rod heat conduction and coupled heat transfer were established according to the bundle structure characteristics of PWR core, and then a nuclear reactor three-dimensional thermal–hydraulic characteristics analysis code CorTAF was developed based on finite volume method with the spatialresolution of subchannel level. The international benchmarks, including GE3 × 3, Weiss and PNL2 × 6 fuel assembly flow and heat transfer experiments, were selected to carry out the validation. The calculation results were basically consistent with the experimental data, illustrating that CorTAF is suitable for predicting the flow and heat transfer characteristics of coolant in the rod bundle fuel assembly. The thermal–hydraulic characteristics of fuel assembly and PWR core under full power operation and blockage accident conditions were simulated using CorTAF. The steady-state and transient spatial distribution of physical quantities in subchannel-scale including coolant and fuel rod temperature were obtained, and the influence of blockage condition on flow and heat transfer characteristics was analyzed. This work has reference significance for the development of core thermal hydraulic analysis tools for PWR.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.