Abstract
This paper describes a new material medium for high density longitudinal recording. Sputtered Co-Pt thin films will be shown to have excellent corrosion resistance and magnetic properties. Co-Pt thin films do not need a thick overcoat like plated Co-Ni-P films do, and have higher remanent flux density than ferrite thin films. Co 1-x Pt x (X=0-0.60) thin films prepared by r.f. diode sputtering have a maximum Hc value near X=20. The Hc, Bs and squareness, for 20 at.% Pt film are 1,100 Oe, 12,000 G and 0.80-0.90, respectively, at 0.1 μm film thickness. These values are not changed over 1-15 Watt/cm2power densities, corresponding to 6-85nm/min deposition rates. Films with more than 28 at.% Pt have no Bs change after immersion in water for over one month, indicating that the films are passive by this test, at least. Ni additions improve magnetic and corrosion properties. There is no Bs change for Co 0.070 Ni 0.010 Pt 0.020 films after immersion in water for over one month. Finally, 51 KFRPI linear recording density was obtained, at D 50 , using a Co 0.70 Ni 0.10 Pt 0.20 thin film disc with a 0.46 μm gap length head and a 0.12 μm head-medium spacing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
