Abstract
AbstractThe corrosion resistance of Ti–Mo (5, 10, 15 and 25 wt% molybdenum) alloys in 5–25% sulphuric acid was evaluated. The Ti–Mo alloys offered a better corrosion resistance than commercially pure titanium (CP‐Ti). The higher impedance values, higher phase angle maximum, ability to reach the phase angle maximum at relatively lower frequencies, ability to exhibit a constant phase angle maximum over a wider range of frequencies, higher phase angle values at 0.01 Hz, have confirmed the formation of a stable passive oxide film on Ti–Mo alloys. The study recommends the use of Ti–Mo alloys, particularly Ti–25Mo alloy, as a suitable material of construction for sulphuric acid medium.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
