Abstract
The corrosion properties of TiN layers obtained by glow discharge on Ti–6Al–4V samples were investigated by polarisation curves, cyclic voltammetry and loss weight tests, in different HCl solutions. The results were compared with those obtained on the untreated alloy tested in the same conditions. The corrosion resistance of nitrided samples depends on the quality of the film and increases as the thickness increases. At potential lower than 1000 mV (SSE) nitrided samples show passive behaviour even in concentrated HCl solution (4M). If the potential is higher than a threshold, which depends on the acid concentration, it is observed a high anodic current related to the TiN oxidation. This enhanced oxide growth promotes cracking of the oxide layer and the exposure of fresh TiN surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.