Abstract
Purpose – The purpose of this paper was to prepare a hybrid organic/inorganic coating with interesting barrier properties against the corrosion of plain carbon steel sheets in 3.5 per cent NaCl solution. The search for replacing chromates in protective coatings has led to the development of hybrid sol-gel anticorrosive coatings. Appropriate functionalization can dramatically enhance the chemical durability and mechanical strength of these coatings. Design/methodology/approach – To prepare the targeted coating, 1,2-epoxybutane (EB) was mixed with 2 to 4 per cent aminoethylaminopropyl-methylsiloxane dimethylsiloxane (APDMS) copolymer and 1,6-diaminohexane. The above coating (EBAC) has been further mixed with three different corrosion inhibitors “Moly-white® 101-ED, Heucophos Zapp® and cerium ammonium nitrate”, yielding the coatings EBAC-M, EBAC-Z and EBAC-Ce, respectively. The corrosion characteristics of all coatings on the steel panels immersed in 3.5 per cent NaCl solution were obtained using different electrochemical methods such as electrochemical impedance spectroscopic and Tafel polarization measurements. Findings – The newly prepared coatings showed interesting protection properties for protecting the steel substrate against corrosion in chloride-containing media. Originality/value – The results provide a good approach for the modification of polydimethylsiloxane coatings using a simple organic modifier.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.