Abstract
Atomic Layer Deposition (ALD) of Al2O3/TiO2 nanolaminate was applied to improve the sealing properties of CrN coating deposited with Physical Vapor Deposition (PVD) on high speed steel (HSS). The corrosion protection properties were explored with Linear Sweep Voltammetry and visual estimation. Nearly two orders of magnitude decrease in corrosion current density was obtained by applying plasma pre-treatment prior to ALD coating. Sealing of CrN pinholes was shown with Focused Ion Beam/Scanning Electron Microscope technique. The effect of the ALD deposition parameters to adhesion of the ALD coatings was investigated with Rockwell indentation and microscope analysis. Thickness and refractive index of the ALD coatings were measured with ellipsometry, and density and roughness of the ALD coatings were investigated with X-Ray Reflectivity measurements. Neutral Salt Spray testing was used to investigate the corrosion resistance of PVD/ALD nanolaminates on HSS dental curettes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
