Abstract
Ceramic oxide coatings were prepared on an aluminum A356 alloy by a plasma electrolytic oxidation (PEO) technique under unipolar, bipolar and duplex unipolar/bipolar current modes. Cross-sectional morphologies of the coatings were studied using a scanning electron microscope (SEM). The corrosion behavior of the coated and uncoated samples was evaluated in ethanol-gasoline E85 fuels through potentiodynamic polarization and zero resistance ammeter (ZRA) testing methods. The results indicated that all the coatings had a better corrosion resistance compared to the uncoated substrate. The unipolar current mode created the PEO coating with a thicker coating microstructure and thus a better corrosion resistance, compared to a bipolar current mode. The duplex treatments of unipolar/bipolar or bipolar/unipolar current modes produced the best performance of the coatings against galvanic corrosions caused by a steel/Al coupling in the E85 fuel medium.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
