Abstract
CrN/Cr-coated stainless steel (STS) 316L is investigated as the material for a metal bipolar plate for a direct methanol fuel cell (DMFC) under actual operating circumstances. Protective coating layers of CrN/Cr are formed on STS 316L using an unbalanced magnetron (UBM) DC sputter via Cr target in an effort to improve the corrosion resistance and long-term stability of the STS 316L. In a corrosion resistance test, the CrN/Cr-coated STS 316L shows much better corrosion resistance than bare STS 316L in simulated electrolytic environments under anodic and cathodic potentials relevant to DMFCs. The interfacial contact resistance (ICR) between CrN/Cr-coated 316L and carbon paper decrease to 4 mΩ cm 2 at a compaction force of 150 N cm −2 compared to bare STS 316L (570 mΩ cm 2). The CrN/Cr-coated STS 316L cell has better cell performance compared to the bare STS 316L cell. Furthermore, the CrN/Cr-coated STS 316L cell exhibit low voltage losses of 38.2 μV h −1 under long-term operation of 760 h. These results show that the CrN/Cr-coated STS 316L, demonstrating its feasibility for use as a metal bipolar plate in a DMFC under actual operating circumstances.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
