Abstract
Abstract The effects of dissolved oxygen, hydrogen, and hydrogen peroxide on the corrosion (electrochemical) potentials (ECPs) of type 304 SS and alloy 182 in simulated boiling water reactor (BWR) coolant environments under various water chemistry conditions at 288°C are reported. In oxygenated systems, the measured ECP fell within the range +20 to −600 mV (vs SHE) depending on the O2 concentration. The effect of water flow rate on the ECP was also studied as function of dissolved O2 concentration. Increasing flow rate at constant oxygen concentration increased the ECPs of type 304 SS and alloy 182. The effect of hydrogen peroxide (H2O2) on the ECP of type 304 SS and alloy 182 in pure water was also determined. The authors found that the concentration of oxygen and the ECP increased immediately when H2O2 was injected into the cell. The measured corrosion potentials of both alloys were 200 to 400 mV more positive than for dissolved O2 at similar levels. However, the ECP was lower than that expected theoret...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.