Abstract
AbstractOffshore structures are generally fabricated of welded joints, which are considered as potential spots for crack initiation owing to the degree of stress concentrations imposed by the weld geometry and the effects of residual stresses introduced by welding processes. There are significant numbers of the current and anticipated offshore installations coupled with the use of newer materials and fabrication techniques. It is therefore important to understand the crack growth mechanisms in these structures accompanied with the effects of mean or residual stresses for a safe estimation of their service lives. In this paper, crack growth results of HAZ and weld materials similar to those used for offshore installations are presented. Tests were conducted in air and in simulated free‐corrosion conditions at loading frequencies of 0.3 Hz in seawater, 5 Hz in air and at loading ratios of 0.1, 0.5 and 0.7. Results showed that crack growth rates were influenced by mean stresses, materials microstructure accompanied by welding procedure and environment. Crack growth results showed good agreement when compared with those obtained from other steels used for offshore structures.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
