Abstract
Corrosion of titanium heat exchangers in the processing of sylvinite ore is undesirable from economic, safety, and process sustainability perspectives. Triggered by an industrial case, we investigated the extent of corrosion during simulated contact with sylvinite ore (in dissolving lye) in relevant conditions. Detailed characterization of the failed tubes and corrosion products was carried out to understand the mechanism of failure. Corrosion of titanium (Grade 2) tubes was investigated at room temperature, 60, 70, 80, and 90 °C. After electrochemical and surface morphology analysis, we found that pitting corrosion of the titanium tube material sharply increased above 80 °C in the simulated sylvinite ore environment (pH 7.1). The failure analysis revealed extensive degradation by transgranular cracking through both the oxide and metal matrix, likely caused by a combination of the high temperature, pressure, possible vibrations, the build-up of lye deposits causing crevices, the high salt content of the lye, and possibly metal (copper, iron, zinc) impurities/deposits in or on the titanium metal, which can catalyze hydrogen evolution.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
