Abstract
This paper reports the corrosion failure analysis of hollow copper coil used in generator internal cooling water (GICW) system operated at low-oxygen/neutral water chemistry in a nuclear power plant. Optical microscope, 3D surface profiler, SEM and tube endoscope were used to characterize the surface morphology of the copper coil. XRD, XPS, EDS and TOF-SIMS were used to identify the chemical composition of the corrosion products. The results show that the copper coil is seriously corroded and plugged. The corrosion products are mainly composed of CuO, Cu(OH)2, Cu2O and CuCO3·Cu(OH)2. This failure is attributed to O2 leakage and CO2 leakage during GICW system operation and shutdown. Their negative effects on the system are then revealed combined the thermodynamics analysis and the field evidences. The low-oxygen/neutral water chemistry requires stringently stable GICW water quality condition, whereas it was markedly changed by the leaked O2 and CO2. Thereby, the passive film was destabilized by phase transformation of the corrosion products and acidic erosion, resulting in the release of copper compound particles and subsequent system plugging. Further, suggestions for the field operation are drawn from this failure analysis. This case study can serve as a warning and a guidance for the safe management of GICW system.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
