Abstract
Pre-sintering for removal of lubricants is one of the most important steps in processing of powder metallurgy materials to achieve corrosion resistance. This is often the most neglected step in the sintering process. Incomplete removal of these organic compounds may result in sensitization of sintered parts. The aim of this study is to investigate the effect of lubricant removal process on the corrosion resistance of sintered AISI 304 L stainless steel filters. Pre-sintering was carried out at 450° C and sintering at 1150° C. As lubricant, 1% wax was used. The corrosion resistance of sintered samples was evaluated by polarization and tests, optical and scanning electron microscopy. The results showed that lubricant removal was not complete and during sintering sensitization of the stainless steel occurred decreasing the localized corrosion resistance of the stainless steel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
