Abstract
Titanium nitride (TiN) coatings with a dense structure were prepared on high-speed steel by plasma-assisted chemical vapour deposition (PACVD). The electrochemical polarization measurement of TiN coating was compared with that of the uncoated substrate. It was found that the TiN coating had a higher corrosion potential, and a lower corrosion rate (current density), about three orders of magnitude less than for the steel substrate. The major corrosion mechanism of TiN was pitting corrosion through surface defects and/or open pores. The number and size of pits decreased with the chlorine content of the film. The TiN coating deposited by PACVD, regardless of the amount of residual chlorine, proved to be a good anti-corrosion coating on a steel substrate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
